Visit Deltasine's YouTube channel Australian Made 3D Printers

Welcome to 3DBRINK

Carbon Fiber PC

More Views

Carbon Fiber PC
CarbonX™ CFR Carbon Fiber Reinforced Polycarbonate (PC) Filament CarbonX™ CFR-PC is a high-performance carbon fiber reinforced PC filament. This filament is ideal for anyone that desires a structrual component with high heat, high modulus, excellent surface quality, dimensional stability. Polycarbonate has a Tg of 147°C, offering some of the highest thermal performance on the 3D market.


Recommended Print Conditions: Extruder: 280-310°C, max 320°C. CarbonX™ CFR is a filled product and has a higher melt viscosity vs. unfilled resin. Therefore, it is sometimes necessary to print at higher temperatures to allow the resin to flow properly. Print Speed: 3000mm/min to start Bed Temp: 110-120°C Bed Prep: 3DXTech Kapton Tape, Glue stick on clean glass, ABS/Acetone Slurry Nozzle: We currently recommend minimum 0.4mm orifice using one of our A2 Hardened Nozzles - HERE Layer Height: Ideal layer height is 60% of nozzle diameter. We do not recommend printing layers below 0.2mm with CF Grades.
Additional Information

Additional Information

Filament Weight N/A
Filament Color No

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.