CarbonX™ Carbon Fiber PETG 3D Printing Filament

CarbonX™ Carbon Fiber PETG 3D Printing Filament

3DXSTAT™ ESD PC 3D Printing Filament

3DXSTAT™ ESD PC 3D Printing Filament

CarbonX™ Carbon Fiber ABS 3D Printing Filament

As low as $81.27
Availability: In stock
CarbonX™ Carbon Fiber

CarbonX™ CFR Carbon Fiber Reinforced ABS Filament

CarbonX™ CFR-ABS is a high-performance carbon fiber reinforced ABS filament ideal for anyone that desires a structrual component with high modulus, excellent surface quality, dimensional stability, light weight, and ease of printing.  Made using 15% High-Modulus Carbon Fiber (not carbon powder or milled carbon fiber).  Made in the USA using premium Sabic MG-94 ABS and high modulus carbon fiber.

CarbonX™ CFR ABS is suitable for use in practically any desktop 3D Printer that has a heated bed.  Please note - carbon fiber reinforced filaments are abrasive and can wear out a brass or aluminum nozzle.  We recommend our A2 Hardened Steel Nozzles - HERE 

New Data:  We updated the mechanical and thermal data on our carbon fiber grades.  You can see the new data HERE on our blog

*Please note:  2kg, 4kg, and 10kg reels are special order and may take up to 1 week to ship.  2kg and 4kg reel dimensions are 11.75" diameter, 4" wide, 2" arbor.  10kg reel dimensions are 16" diameter, 5.5" wide, 1.5" arbor.  


Recommended Print Conditions:

  • Extruder:  220-240°C.  3DXMAX™ CFR is a filled product and has a higher melt viscosity vs. unfilled resin.  Therefore, it is sometimes necessary to print at higher temperatures to allow the resin to flow properly.  
  • Bed Temp:  100-110°C
  • Bed Prep:  3DXTech Kapton Tape, ABS/Acetone Slurry
  • Nozzle: We currently recommend minimum 0.4mm orifice. 
  • Layer Height:  Ideal layer height is 60% of nozzle diameter.  We do not recommend printing layers below 0.2mm with CF Grades.  


More Information
Choose Color Natural
Write Your Own Review
You're reviewing:CarbonX™ Carbon Fiber ABS 3D Printing Filament

No Related Posts