CarbonX™ Carbon Fiber PC 3D Printing Filament

As low as $112.22
Availability: In stock

CarbonX™ CFR Carbon Fiber Reinforced Polycarbonate (PC) Filament

CarbonX™ CFR-PC is a high-performance carbon fiber reinforced PC filament.  This filament is ideal for anyone that desires a structrual component with high heat, high modulus, excellent surface quality, dimensional stability.  Polycarbonate has a Tg of 147°C, offering some of the highest thermal performance on the 3D market.  

Recommended Print Conditions:

  • Extruder:  280-310°C, max 320°C.  CarbonX™ CFR is a filled product and has a higher melt viscosity vs. unfilled resin.  Therefore, it is sometimes necessary to print at higher temperatures to allow the resin to flow properly.  
  • Print Speed:  3000mm/min to start
  • Bed Temp:  110-120°C
  • Bed Prep:  3DXTech Kapton Tape, Glue stick on clean glass, ABS/Acetone Slurry
  • Nozzle: We currently recommend minimum 0.4mm orifice using one of our A2 Hardened Nozzles - HERE
  • Layer Height:  Ideal layer height is 60% of nozzle diameter.  We do not recommend printing layers below 0.2mm with CF Grades.  
Write Your Own Review
You're reviewing:CarbonX™ Carbon Fiber PC 3D Printing Filament